Gaming Series
One, One Hundred, Three Hundred, Three Hundred Two, Nine Hundred, Nine Hundred Two V1-V3, Eleven Hundred V1-V2, Twelve Hundred, Twelve Hundred V1-V3, Nineteen Hundred
Here are some photos on how to replace a front fan on the Gaming case for 900, 902 V1-V3, 1200 V1-V3
Once you've remove the stock fan, pla...
Thu, Jan 29, 2015 at 10:55 AM
There are two 2.5” SSD drive mounting locations in the Three Hundred Two:
On the back of the motherboard tray
At the bottom of the case
...
Tue, Nov 11, 2014 at 1:08 PM
The parts consist of the following to install 1 HDD
4 x PCI slot cover
4 x P280 HDD screws
4 x Silicone HDD Grommets
Here are some phot...
Wed, Jul 15, 2015 at 8:47 AM
How to remove the
remove/replace the Antec 902/1200’s “Big Boy” 200mm Top Fan
· Remove the side panels
· Turn case upside down
· ...
Fri, Jan 9, 2015 at 8:57 AM
Some of you are wondering how can you install a SSD inside the 900, 902 and 1200 gaming case? Here are some pictures on the Solution:
Some SSD have t...
Mon, Jan 5, 2015 at 5:10 PM
To remove the power/reset button on your 302:
1. Remove the left side panel.
2. Depress the 3 clips (circled in red below) that hold the front pa...
Fri, May 8, 2015 at 9:47 AM
You will need:
1x Phillips Head screw driver
Instructions:
1. Start by removing the left side panel from the chassis.
...
Fri, May 29, 2015 at 11:34 AM
You will need:
1x Phillips Head screw driver
Instructions:
1. Start by removing the left side panel from the chassis.
...
Fri, May 29, 2015 at 10:58 AM
Due to the increasing standards for cable management compatibility in computer cases, the rails are actually designed for the HDD connectors to be facing th...
Thu, Aug 20, 2015 at 10:24 AM