Make sure the speakers are fully charge.
Hold the power button for approximately 10-15 seconds
It should say "Power On" and the red LED Light should turn on
To pair your speaker have your phone ready and have the Bluetooth connection on
Hold the power button down for 15-20 seconds or until it says "Pairing" and the light should flash Blue and Red
Scan the device on your phone and it should be called SP Zero or SP 1.
Click the Speakers name on the scanned devices, if it prompts for a password enter 0-0-0-0
If the pairing was successful it will say "Pairing Complete" or it will just "Bleep"
Note***
If you can't hear anything make sure your phones volume are raised up and the speakers volume as well.